Culligan Mark 100 Instruções de Operação descarregar pdf (Página 14)

12 CULLIGAN

MARK 100 WATER SOFTENER

Settings

The mircoprocessor can be set in three distinct operation modes. Aqua-Sensor



Sensing Device, Soft-Minder



meter, or Timeclock. As shipped from the factory, the control is set for 9" Timeclock operation. A set of dip

switches, located on the back of the control, may have to be changed for proper operation of the unit. Refer to

Figure 12 and Table 3 for the proper setting of these dip switches.

AQUA-SENSOR



OPERATION

The Aqua-Sensor



Sensing Device utilizes a pair of cells to sense the passage of hardness through the water

softener. It can automatically adjust for water with variable hardness levels. As a result, it is the most efficient

means of operating a water softener. When hardness is sensed, the unit signals for a regeneration. The

"REGEN" enunciator will light at this point. The unit will perform a standard regeneration cycle at the preset

time, unless the number 6 dip switch is turned on. When the number 6 dip switch is in the 'ON' position, a

regeneration will begin immediately.

The Aqua-Sensor



models contain a feature which can automatically detect when the brine solution has been

rinsed through the Cullex



media. This feature will advance the control to the next position when it senses that

the brine has been rinsed out prior to the time set in the Brine/Rinse option.

Since the Aqua-Sensor



device automatically senses hardness in the water, the programming is limited to the

Time-of-Day, Time-of-Regeneration, Salt Dosage, Backwash Time and Brine/Rinse settings. The numeric

enunciator will only light for those programming options (numbers 1-6, 9, and 10). Refer to the programming

section for further information on programming the microprocessor.

SOFT-MINDER



OPERATION

The Soft-Minder



meter utilizes a turbine impeller to accurately monitor the customers water usage. After a

predetermined amount of water has passed through the system, the microprocessor will signal a regeneration.

The "REGEN" enunciator will light at this point. The unit will perform a standard regeneration cycle at the

preset time, unless the number 6 dip switch is turned on. When the number 6 dip switch is in the 'ON' position, a

regeneration will begin immediately.

The microprocessor automatically calculates the gallons of water which can be treated based on the salt dosage,

the water hardness, and the tank size. Refer to Tables 4B and 5B for capacity and reserve values that the

microprocessor will use based on its settings. The GALLONS TO SIGNAL setting can be manually set to

directly override the microprocessor calculations. This setting can be modified when positioned at numeric

enunciator 8. The gallon value may need to be raised or lowered to meet the needs of your specific application.

The control must be cycled through a complete regeneration before the gallon override setting is stored by the

microprocessor.

NOTICE: Changing the capacity will affect the reserve capacity. An INCREASE in the gallons capacity will

DECREASE the reserve capacity. A DECREASE in the gallons capacity will INCREASE the reserve capacity.

Refer to Tables 4B and 5B to determine the units total capacity based on salt dosage and the hardness level.

The programming of the Soft-Minder



provides several settable variables, the Time-of-Day, Time-of-Regenera-

tion, Salt Dosage, Backwash Time, Brine/Rinse Time, Hardness, and Gallons to Signal. The numeric enunciator

will light for programming sequences 1-10. Refer to the programming section for further information on

programming the microprocessor.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 29 30

Comentários a estes Manuais

Sem comentários

Culligan Mark 100 Instruções de Operação Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Aparelhos de ar condicionado "split system" Culligan Mark 100